Magnetic Accessories

A magnetic broom is a tool used to pick up small metal objects, such as nails, screws, nuts, pins, among others, on surfaces such as soil or sand. It is made up of a strong magnet mounted at the bottom of a long handle.

When using a magnetic broom, the magnet attracts metal objects to the base of the tool, allowing them to be picked up quickly and efficiently. Magnetic brooms are commonly used in construction, the automotive industry, cleaning public areas, and anywhere small metal objects are required to be picked up.

Magnetic sweepers are tools used to clean up areas where small metal objects have been spilled, such as nails, screws, staples, nuts, among others. These tools consist of a flat metal or plastic plate or base with a series of high intensity magnets mounted on its bottom. As the magnetic sweeper is pushed across the floor, the magnets pick up and hold metal objects, leaving the area clean.

Magnetic sweepers are very useful in a variety of settings, such as machine shops, factories, warehouses, and construction sites, where metal objects can present a safety hazard or affect product quality. They are also very useful for cleaning up outdoor areas, such as parking lots, where metal objects have been spilled.

Magnetic knife and tool holders are devices designed to hold and store metal tools and knives in a secure and accessible position. They are made up of a strong magnetic bar that attaches to a surface, such as a wall, and holds knives or tools in place through magnetic attraction.

Magnetic knife and tool holders are a great way to keep tools organized and within sight in workshops, kitchens, garages, and other spaces where tools and knives are used on a regular basis. They can also be a safer way to store tools and knives than conventional cases, since the edges of the knives and tools are not in contact with other objects that could damage or dull them.

Magnetic knife and tool holders are available in a variety of sizes and designs, and can be made from different materials, including wood, stainless steel, aluminum, and plastic. Some magnetic holders are also equipped with additional features, such as hooks for hanging larger tools and knives.

A telescoping magnet is a tool used to retrieve small, hard-to-reach metal objects in narrow or deep areas, such as holes, pipes, motors, and other similar areas. It is designed with a strong magnet mounted at the end of a telescopic shaft, which can be extended or retracted as required.

Telescopic magnets are useful for retrieving small metal parts, such as screws, nuts, washers, and other similar objects, that have been dropped or lost in inaccessible areas. By extending the telescopic shaft, the magnet can reach into the deepest or narrowest areas to pick up the metal objects.

Some telescopic magnets have additional features, such as an LED light on the end to illuminate dark areas, or an interchangeable magnetic head to accommodate different sizes and shapes of metal objects.

Pole detectors are devices used to identify the polarity of a magnet. They are based on the ability of magnetic fields to attract or repel other magnetic fields.

Pole detectors are typically small and portable, and are designed to be easy to use. Some pole detectors have a magnetic tip that is brought close to the magnet and oriented toward one of the poles, thus indicating the polarity of the magnet. Other pole detectors may have a display that shows the polarity of the magnet when placed near it.

Pole finders are useful in a variety of applications where magnets are used, such as motor manufacturing, electronics, and medical equipment manufacturing. They are particularly useful for verifying the correct polarity of magnets in applications such as loudspeaker manufacturing, where incorrect polarity can affect device performance.

A gaussmeter is an instrument used to measure the intensity of a magnetic field. Also known as a magnetometer, the gaussmeter is used in a variety of applications in industry, science, and technology.

The gaussmeter works by detecting the effect of the magnetic field on a material sensitive to the magnetic field, such as a Hall sensor. When the Hall sensor is exposed to a magnetic field, it produces an electrical signal proportional to the strength of the magnetic field. This signal is converted to a gauss reading on the instrument display.

Gaussmeters are used in a wide variety of applications, including the measurement of magnetic field strength in motors, generators, transformers, and other electrical equipment. They are also used in scientific research, medicine, and geology to measure the magnetic field of the Earth and other objects.

Magnetic squares are tools used to hold and measure metal parts at right angles (90 degrees) in welding, carpentry, machine building, and other metal-related work. They are designed with two metal pieces that come together at a right angle and are held together by a strong magnet.

Magnetic squares allow metal parts to be held in place during the welding process or other work, helping to ensure parts are joined correctly and at the proper angle. They can also be useful for the precise measurement of angles and for checking the squareness of structures or workpieces.

Magnetic squares are available in a variety of sizes and designs, and some are equipped with additional features such as levels and markers for more precise measurements. They can also be made of different materials, such as stainless steel or aluminum, depending on the application.

Rubber sleeves for magnetic bases are accessories used to cover the magnetic surface of a magnetic base. They are designed to protect the magnetic surface from scratches and damage, while providing additional grip to the magnetic base to prevent it from slipping or scratching your work surface.

Rubber boots for magnetic bases are made of high-quality materials, such as natural or synthetic rubber, and fit perfectly on the surface of the magnetic base. They provide a smooth, non-slip surface for the magnetic base to stick to your work surface without slipping or scratching the surface.

Rubber Sleeves for Magnetic Bases are ideal for use in welding shops, woodworking, mechanics, and other jobs that require a magnetic base to hold metal parts in place during precision work. They are also a great way to protect work surfaces such as work tables, work benches, and other work surfaces from scratches and damage caused by the magnetic base.